Specify how the automatic curve widening is applied. Settings can be customised to meet various design standards.
|
Option
|
Description |
| Widening Type |
Specifies how the widening is applied, Inside only, Outside only or Both inside and outside. |
| % of transition curve |
Specify the percentage of the widening to apply on transition curves. |
| Max width |
Specify whether or not to specify a max widening width. |
| Widening Method |
Specify how the inside and/or outside curve widening distance and transition length is calculated. Either using AASHTO Simple formula, AASHTO Standard formula or the Curve Widening Table in the Design Criteria. |
| Normal lane width (m) |
Specify the normal lane width used in the AASHTO formula. |
| Number of left lanes |
Specify the number of left lanes used in the AASHTO formula. |
| Number of right lanes |
Specify the number of right lanes used in the AASHTO formula. |
| Wheelbase length (m) |
Specify the wheelbase length of the vehicle used in the AASHTO formula. |
See Also Design Criteria