Single Surface Grid
|
Option
|
Description |
|
Search hole distance |
Enter the distance beyond which interpolations should be discarded. |
|
Datum elevation |
Enter the base elevation from which to determine volumes. The initial value is calculated from the lowest point on the site, and a higher value than this can not be specified. |
Ground Design Surface or Difference Grid
|
Option
|
Description |
|
Ground hole distance |
Enter the distance beyond which interpolations on the ground surface should be discarded. |
|
Design hole distance |
Enter the distance beyond which interpolations on the design surface should be discarded. |
See Also DTM Grid Volumes